16
Cisco SFS 3504 Multifabric Server Switch Installation and Configuration Note
78-18335-01
Configuring the Cisco SFS 3504 Server Switch
Note If your host does not provide enough free space around a given IB port, verify that your IB cable
connector engages completely. Wiggle your connector back and forth to be sure that both sides of the
connector have locked firmly into place.
To remove a cable with a pinch connector, pinch both sides of the back of the connector, and pull the
connector away from the port. (See Figure8.)
Figure8 Removing a Pinch Connector
To remove a cable with a pull connector, grasp the connector with one hand, push it toward the port, and
then pull the latch away from the port with your other hand while gently wiggling the connector away
from the port. (See Figure 9.)
Figure9 Removing a Pull Connector
250387
Press here
Press here
250388
Hold here
Hold here
Pull here