Cisco Systems SLM2008PTNA manual Etherlike Statistics

Viewing Statistics	2
Etherlike Statistics

Etherlike Statistics

The system collects and reports statistics on ports and LAGs in accordance with RFC2665.

To display this page, click Status and Statistics > Etherlike in the navigation window.

Select the interface (Port or LAG) for which you want to display statistics, then select a refresh rate for the statistics. These statistics are cumulative since the last time the page was refreshed. The following information displays for the selected interface:

•Frame Check Sequence (FCS) Errors—FCS errors received.

•Single Collision Frames—Signal collision frame errors received.

•Late Collisions—Late collision frames received.

•Excessive Collisions—Excessive collision frames received.

•Multiple Collisions—Multiple collision frames received.

•Oversize Packets—Packets received that were longer than 1518 octets (excluding framing bits and including FCS octets) and were otherwise well- formed.

•Internal MAC Receive Errors—Internal MAC errors received on the LAG or interface.

•Alignment Errors—Packets received with alignment errors

•Pause Frames Received—Pause frames received on the LAG or interface.

•Pause Frames Transmitted—Pause frames transmitted from the LAG or interface.

To clear statistics counters:

Click Clear Interface Counters to reset all counters to 0 for the selected interface.

Click Clear All Interface Counters to reset all counters to 0 for all interfaces.

Cisco Small Business SG200 Series 8-port Smart Switch 23