EMC Class A Notices and Warnings
Statement 157—VCCI Compliance for Class B Equipment
Warning This is a Class B product based on the standard of the Voluntary Control Council for Interference from Information Technology Equipment (VCCI). If this is used near a radio or television receiver in a domestic environment, it may cause radio interference. Install and use the equipment according to the instruction manual.
EMC Class A Notices and Warnings
This section includes the following EMC Class A warnings for Cisco 888 and IAD881 models:
•Class A Notice for FCC
•CISPR 22 Class A Statement
•Canadian Class A Statement
•Statement 191—VCCI Class A Warning for Japan
Class A Notice for FCC
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
Warning Modification of this equipment without Cisco's authorization may result in this equipment no longer complying with FCC requirements for Class A digital devices. In that event, your right to use the equipment may be limited by FCC regulations, and you may be required to correct any interference to radio or television communications at your own expense.
Regulatory Compliance and Safety Information for Cisco 800 Series and SOHO Series Routers
6 |
| |
|
