Electromagnetic Compatibility
•Australia Compliance Statement
•Statement 157—VCCI Compliance for Class B Equipment
Agency Approvals and Standards
This section lists the following agency approvals and standards for EMC:
•CFR47 part 15 subpart B, 2000 class B
•EN55022, 1998 class B, CISPR22, 1997 class B
•EN55024, 1998 Immunity Std, CISPR24, 1997 Immunity Std
•
•
•
•
•
•
•
•AS/NZS 3548
•CCC
FCC Class B Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna
•Increase the separation between the equipment and the receiver
•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
Caution Modification of this equipment without Cisco’s authorization may result in this equipment no longer complying with FCC requirements for Class B digital devices. In that event, your right to use the equipment may be limited by FCC regulations, and you may be required to correct any interference to radio or television communications at your own expense.
Regulatory Compliance and Safety Information for Cisco 800 Series and SOHO Series Routers
4 |
| |
|
