Cisco Systems SOHO Series manual Electromagnetic Compatibility, Power Cable and AC Adapter

Electromagnetic Compatibility

Operating Conditions for the United Kingdom

In addition to the warnings and safety guidelines listed in the “Translated Safety Warnings” section on page 17, the following warnings apply to routers used in the United Kingdom:

Interconnection directly, or by way of other apparatus, of ports marked:

“Safety Warning—See instructions for use”

with ports marked or not so marked may produce hazardous conditions on the network, and that advice should be obtained from a competent engineer before such a connection is made.

•The ports marked “Ethernet” and “Console” have a safety warning applied to them as follows:

“These ports do not provide isolation sufficient to satisfy the requirement of EN 41003; apparatus connected to these ports should either have been approved to EN 41003 or have previously been evaluated against B5E301 British Telecommunications plc (Post Office) Technical Guides 2 or 26 and given permission to attach; any other usage will invalidate any approval given to this apparatus.”

Other usage will invalidate any approval given to this apparatus if as a result it ceases to comply with EN 41003:1993.

•This apparatus must be connected to a main socket outlet with a protective earth contact.

•Connection of power supply: The router is intended for use when supplied with power from a supply providing 100 to 250 VAC, 50 to 60 Hz up to 0.5A.

Power Cable and AC Adapter

Warning When installing the product, please use the provided or designated connection cables/power cables/AC adaptors. Using any other cables/adaptors could cause a malfunction or a fire. Electrical Appliance and Material Safety Law prohibits the use of UL-certified cables (that have the “UL” shown on the code) for any other electrical devices than products designated by CISCO. The use of cables that are certified by Electrical Appliance and Material Safety Law (that have “PSE” shown on the code) is not limited to CISCO-designated products. Statement 371.

Electromagnetic Compatibility

This section describes electromagnetic compatibility (EMC) compliance conditions for the Cisco 800 series routers and Cisco SOHO routers. It contains the following:

•Agency Approvals and Standards

•FCC Class B Statement

•CISPR 22 Class B Statement

•Canada Compliance Statements

Regulatory Compliance and Safety Information for Cisco 800 Series and SOHO Series Routers

OL-10260-02 3