Cisco Systems VG204XM, VG202XM Connecting Cables, Chassis Ground Connection Using Ring Terminal

Chapter 3 Installing the Voice Gateway

Figure 3-5 Chassis Ground Connection Using Ring Terminal

FastEthernet		CON		VG204
		SOLE
				FXS
0/1	0/0	AUX
		0/3	0/2	0/1
					0/0

12V DC SA

1

1Ring terminal attachment

Connecting Cables

•Warnings, page 3-9

•Connecting Input Power to the Chassis, page 3-10

•Connecting a Terminal or PC to the Console Port, page 3-10

•Connecting an FXS Line, page 3-11

Connecting Cables

232069

Warnings

Warning Do not work on the system or connect or disconnect cables during periods of lightning activity. Statement 1001

Warning Take care when connecting units to the supply circuit so that wiring is not overloaded. Statement 1018

Warning This product relies on the building’s installation for short-circuit (overcurrent) protection. Ensure that

the protective device is rated not greater than: 120 VAC, 15A (240 VAC, 10A international) Statement 1005

Warning To prevent accidental discharge in the event of a power line cross, route on-premise wiring away from power cables and off-premise wiring, or use a grounded shield to separate the on-premise wiring from the power cables and off-premise wiring. A power line cross is an event, such as a lightning strike, that causes a power surge. Off-premise wiring is designed to withstand power line

Cisco VG202, Cisco VG202XM, Cisco VG204, and Cisco VG204XM Voice Gateways Hardware Installation Guide

OL-15959-01 3-9