Cisco Systems WAP4410N - page 71

Configuring the WAP4410N Wireless-N Access Point
Configuring Status Settings
WAP4410N Wireless-N Access Point with Power Over Internet 62
6
To check local network status, follow these steps:
STEP1 Click Status > Local Network.
This page displays the status information of your access point:
•Information
-Hardware Version—The version of the access point’s current hardware.
-Software Version—The version of the access point’s current software.
-Local MAC Address—The MAC address of the access point’s local
network interface.
-System Up Time—The length of time the access point has been running
for.
•Local Network
-IP Address—The access point’s IP address as it appears on your local
network.
-Subnet Mask—The access point’s subnet mask.
STEP 2 To update the status information, click Refresh.