Installing the MSFC2

Step 4 Carefully seat the MSFC2 onto the supervisor engine (see Figure 6).

Step 5 Using your thumbs, apply pressure at the locations shown in Figure 6 to ensure that the MSFC2 is securely seated on the supervisor engine.

Caution Ensure that the MSFC2 is securely seated before you install and tighten the cap nut and securing screws. Using the screws to seat the MSFC2 could warp the card.

Caution Use care not to damage the connectors on the supervisor engine. If you damage a connector, you will have to return the supervisor engine to Cisco for repair.

Figure 6 Seating the MSFC2 on the Supervisor Engine

Apply pressure to these areas

SWITCH LOAD

PORT 1

PORT 2

100%

 

LE

MGMT

 

 

 

SYSYEMCO

NSO

CONSOLE

 

 

PWR

RESET

 

 

 

 

 

PORT

 

 

 

 

 

,MODE

 

 

 

 

CONSOLE

PCMCIA

EJECT

1%

SUPERVISOR 2

63699

Step 6 Use a Phillips-head screwdriver to install the screws that secure the MSFC2 to the supervisor engine. (See Figure 7).

Caution You must install all screws. The screws provide grounding between the MSFC 2 and the supervisor engine. Failure to install all screws will invalidate the safety approvals and can cause fire and electrical hazards.

Catalyst 6000 Family Multilayer Switch Feature Card 2 Installation Note

12

78-10605-03

 

 

Page 11 Page 13
Page 12
Image 12
Cisco Systems WS-F6K-MSFC2 manual Seating the MSFC2 on the Supervisor Engine
Page 11 Page 13

WS-F6K-MSFC2 specifications

Cisco Systems WS-F6K-MSFC2, or Multi-layer Switch Feature Card 2, is an advanced component designed for use in Cisco's Catalyst 6500 series switches. This card serves a critical role in enabling advanced routing capabilities alongside traditional switching functions, making it an essential piece of network infrastructure for enterprise environments.

One of the main features of the WS-F6K-MSFC2 is its support for a wide range of Layer 2 and Layer 3 protocols. This versatility allows organizations to efficiently manage both wired and wireless traffic, ensuring seamless communication across diverse networking environments. The card is designed to enhance the scalability of Cisco Catalyst switches by providing an effective means to handle high volumes of traffic, thereby supporting the growing needs of modern networks.

The WS-F6K-MSFC2 incorporates advanced technologies such as IP routing, Quality of Service (QoS), and Integrated Firewall capabilities. The IP routing feature supports routes and protocols such as OSPF, EIGRP, and BGP, facilitating robust interconnectivity within large networks. With QoS functionality, the card helps prioritize critical applications, ensuring that latency-sensitive traffic like voice and video receives the bandwidth it requires.

Additionally, the WS-F6K-MSFC2 supports Virtual Routing and Forwarding (VRF), which allows multiple virtual routing instances within a single router, thereby optimizing network resources and enhancing security. This technology is particularly beneficial for service providers and organizations that require separate data flow paths for different units.

The card is built with reliability in mind, supporting various redundancy and failover mechanisms, such as Hot Standby Router Protocol (HSRP) and redundancy protocols that ensure continuous operation even in the event of a hardware failure. Furthermore, the WS-F6K-MSFC2 is designed to integrate seamlessly with other Cisco networking components, providing a cohesive approach to network management and security.

In summary, the Cisco WS-F6K-MSFC2 Multi-layer Switch Feature Card 2 stands out due to its robust Layer 2 and Layer 3 functionality, advanced routing protocols, QoS, and redundancy features. It is highly regarded for its ability to enhance the performance and scalability of enterprise networks, making it a preferred choice for organizations looking to ensure efficient, reliable, and secure networking solutions. With its versatile capabilities, the WS-F6K-MSFC2 continues to be a vital asset in the ever-evolving landscape of networking technology.
Top Page Image Contents