Removing the MSFC from the Supervisor Engine 1A

To prepare the supervisor engine, follow these steps:

Step 1 Upload the current configuration to a server. On any modules running Cisco IOS, save the running configuration.

Step 2 Shut down the switch.

Step 3 Remove the supervisor engine from the Catalyst 6000 family switch. (Refer to the Catalyst 6000 Family Module Installation Guide for removal instructions.)

Step 4 Place the supervisor engine on an antistatic mat or foam.

To remove the MSFC from the Supervisor Engine 1A, see the “Removing the MSFC from the Supervisor Engine 1A” section on page 8 and follow the instructions for removing the MSFC.

To install the MSFC2 on a Supervisor Engine 2, see the “Installing the MSFC2” section on page 10 and follow the instructions for installing the MSFC2.

Removing the MSFC from the Supervisor Engine 1A

Note You must remove the Flash SIMM from the MSFC to access two mounting screws that are located under the SIMM.

Caution Handle the SIMM by its edges only; avoid touching the memory module, pins, or traces (the metal fingers along the connector edge of the SIMM). SIMMs are sensitive components that are susceptible to ESD damage and can be shorted by mishandling.

To remove the MSFC from the Supervisor Engine 1A, follow these steps:

Step 1 Note that the Flash SIMM is located at the rear of the MSFC (see Figure 1). Pull the locking spring clips on both sides of the Flash SIMM outward and tilt the Flash SIMM free of the clips (see Figure 2). Be careful not to break the clips on the Flash SIMM connector.

Catalyst 6000 Family Multilayer Switch Feature Card 2 Installation Note

8

78-10605-03

 

 

Page 7 Page 9
Page 8
Image 8
Cisco Systems WS-F6K-MSFC2 manual Removing the Msfc from the Supervisor Engine 1A
Page 7 Page 9

WS-F6K-MSFC2 specifications

Cisco Systems WS-F6K-MSFC2, or Multi-layer Switch Feature Card 2, is an advanced component designed for use in Cisco's Catalyst 6500 series switches. This card serves a critical role in enabling advanced routing capabilities alongside traditional switching functions, making it an essential piece of network infrastructure for enterprise environments.

One of the main features of the WS-F6K-MSFC2 is its support for a wide range of Layer 2 and Layer 3 protocols. This versatility allows organizations to efficiently manage both wired and wireless traffic, ensuring seamless communication across diverse networking environments. The card is designed to enhance the scalability of Cisco Catalyst switches by providing an effective means to handle high volumes of traffic, thereby supporting the growing needs of modern networks.

The WS-F6K-MSFC2 incorporates advanced technologies such as IP routing, Quality of Service (QoS), and Integrated Firewall capabilities. The IP routing feature supports routes and protocols such as OSPF, EIGRP, and BGP, facilitating robust interconnectivity within large networks. With QoS functionality, the card helps prioritize critical applications, ensuring that latency-sensitive traffic like voice and video receives the bandwidth it requires.

Additionally, the WS-F6K-MSFC2 supports Virtual Routing and Forwarding (VRF), which allows multiple virtual routing instances within a single router, thereby optimizing network resources and enhancing security. This technology is particularly beneficial for service providers and organizations that require separate data flow paths for different units.

The card is built with reliability in mind, supporting various redundancy and failover mechanisms, such as Hot Standby Router Protocol (HSRP) and redundancy protocols that ensure continuous operation even in the event of a hardware failure. Furthermore, the WS-F6K-MSFC2 is designed to integrate seamlessly with other Cisco networking components, providing a cohesive approach to network management and security.

In summary, the Cisco WS-F6K-MSFC2 Multi-layer Switch Feature Card 2 stands out due to its robust Layer 2 and Layer 3 functionality, advanced routing protocols, QoS, and redundancy features. It is highly regarded for its ability to enhance the performance and scalability of enterprise networks, making it a preferred choice for organizations looking to ensure efficient, reliable, and secure networking solutions. With its versatile capabilities, the WS-F6K-MSFC2 continues to be a vital asset in the ever-evolving landscape of networking technology.
Top Page Image Contents