Cissell AJ1032 Cleaning Press Head, Maintenance, Time Intervals, Corrective Action, Operation or Inspection, Let heated surfaces cool, •Let heated surfaces cool

Maintenance

Time Intervals	Operation or Inspection	Corrective Action

Daily or as required	Visually inspect sight glass in air line filter at	If moisture and oil are collecting in bowl, auto-
	inlet. (Refer to Item 4, Figure 4.)	drain is not working. Clean, repair or replace
		auto-drain.

	Check buck padding.	Clean padding. Replace padding if it is torn or
		brittle or has burn spots.

	Visually inspect press head for discoloration or	Clean press head with a head surface cleaner as
	stickiness.	needed.

Weekly	Inspect air line filter for sediment.	Clean air filter if dirt is present.

	Inspect all safety labels. Refer to Parts Manual	Replace labels which are damaged, missing or
	for location and description of labels.	unreadable.

Every two weeks	Inspect steam strainers in steam inlet and outlet	Clean steam strainer if dirt is present.
	lines and in traps.

Monthly	Inspect customer-furnished steam traps per	Clean customer-furnished steam traps if dirt is
	instructions provided with traps.	present.

	Check all steam and air connections for visual	Tighten any loose connections. Replace lines
	signs of leakage.	where necessary.

	Check condition of the flexible steam hoses.	Replace steam hoses with broken braids.

Every six months	Remove all covers and check cap screws,	Tighten as required.
	fittings and cylinders for security of
	attachment.

	Table 2

Cleaning Press Head

Cleaning press head is periodically required. Press head requires cleaning if discoloration transfers from head to garments or garments stick to head as it opens.

WARNING

To avoid possible serious injury, heads should be cleaned ONLY by properly trained personnel.

W342

WARNING

If using a surface cleaner which requires heat to the press, use industry approved heat protective mitt or other heat protective device as press heads are cooling down.

W344

Once precautions in above WARNINGS have been met, follow directions provided with surface cleaner.

WARNING

To avoid possible serious injury, ALWAYS shut off services to press BEFORE cleaning press heads:

•Shut off AND lock out ALL electric power to press.

•Shut off AND lock out ALL air pressure to press using relieving shut-off valve at air supply inlet.

•Reduce to zero AND lock out ALL steam pressure to press.

•Let heated surfaces cool.

W343

AJ1032