Safety Information
Precautionary statements (“DANGER,” “WARNING,” and “CAUTION”), followed by specific instructions, are found in this manual and on machine decals. These precautions are intended for the personal safety of the operator, user, servicer, and those maintaining the machine.
DANGER
Indicates an imminently hazardous situation that, if not avoided, will cause severe personal injury or death.
WARNING
WARNING indicates the presence of a hazard that can cause severe personal injury, death, or substantial property damage if the warning is ignored.
CAUTION
CAUTION indicates the presence of a hazard that will or can cause minor personal injury or property damage if the caution is ignored.
Additional precautionary statements (“IMPORTANT” and “NOTE”) are followed by specific instructions.
IMPORTANT: The word “IMPORTANT” is used to inform the reader of specific procedures where minor machine damage will occur if the procedure is not followed.
NOTE: The word “NOTE” is used to communicate installation, operation, maintenance or servicing information that is important but not hazard related.
WARNING
To reduce the risk of fire, electric shock, serious injury or death to persons when using your press, follow these basic precautions:
W372
1.Read all instructions before using the press.
2.Refer to the GROUNDING INSTRUCTIONS in the INSTALLATION manual for the proper grounding of the press.
3.Do not allow children to play on or around the press.
4.Do not reach into the press while the press is in operation.
5.Do not install or store the press where it will be exposed to water and/or weather.
6.Do not tamper with the controls.
7.Do not repair or replace any part of the press, or attempt any servicing unless specifically recommended in the
8.To reduce the risk of an electric shock or fire, DO NOT use an extension cord or an adapter to connect the press to the electrical power source.
9.Use press only for its intended purpose, finishing garments.
10.ALWAYS disconnect the press from electrical supply before attempting any service. Disconnect the power cord by grasping the plug, not the cord.
11.Install the press according to the INSTALLATION INSTRUCTIONS. All connections for steam, electrical power and grounding must comply with local codes and be made by licensed personnel when required.
AJ1032 | © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT | 5 |