Cissell AJ1032 Introduction, Nameplate Location, Optional Equipment, General Description, Parts Ordering Information

Introduction

Nameplate Location

The nameplate is located at the right side of the unit. Always provide the machine’s serial number and model number when ordering parts or when seeking technical assistance.

SCR1529C

1Nameplate

Figure 1

Parts Ordering Information

If literature or replacement parts are required, contact the source from which the machine was purchased or contact Cissell at (502) 587-1292 for the name and address of the nearest authorized parts distributor.

General Description

Press is an air operated, steam heated garment press. Press is designed for pressing of damp garments. Major press components are:

•Steam heated head and buck.

•One air cylinder dedicated to closing head AND automatically apply pressing pressure once head is closed.

•An adjustable muffler that cushions head opening.

•Head opening springs which extend as head closes. Springs contract to open head.

•A timer control (optional on some presses) which automatically opens press head at a set time. Timer can be turned off for manual operation.

•A two hand, anti-tie down synchronous control which controls closing of press head.

•A filter, regulator, lubricator and lockout downstream air relieving shut-off and lockout valve at air inlet.

Optional Equipment

Optional equipment available for press includes:

•Manual water spray for hookup of city water

•Manual water spray with copper water reservoir

AJ1032