4

Function F3 (reduced wash action):

By selecting F3, the wash action time and pause time will be reversed; unless the wash action time was programmed to be shorter than the pause time. Example: 12 sec. action/3 sec. pause becomes: 3 sec. action/12 sec. pause

6 sec. action/9 sec. pause remains: 6 sec. action/9 sec. pause This function does not influence the cycle time - the program continues normally - and remains active until the START-button (S) is pressed.

Function F4 (execute high spin as low spin):

By activating this function, high spin will be automatically replaced by low spin.

This function does not influence the cycle time - the program continues normally - and remains active until the START-button (S) is pressed.

Function F5 (rapid advance):

This function is mostly used by technicians and maintenance staff. It allows to the program.

By pressing and releasing the ECO-button (E), the programs skips to the next segment.

Attention!

If F5 is activated during final spin, this segment of the program will be skipped as described above. It is however followed by a coast and tumble time to disentangle the linen. This special function prevents the user from opening the machine while the drum is still rotating and represents an important safety feature.

To return to normal operation, press the START-button (S).

Function F6 (no spin):

This function eliminates all spin action.

Intermediate spin is replaced by a regular wash action. During final spin, only the programmed low spin time will be completed as regular wash action. High spin is skipped in its entirety.

This function influences the cycle time - the program continues normally - and remains active until the START-button (S) is pressed.

Function F7 (indication of the rpm)

By using F7 the number of revolutions of the drum (rpm) appears on the right display.

Function F8 ( changing the number of revolutions (rpm) at final spin)

By means of F8, the number of revolutions can be changed at high spin. The programmed number of revolutions appears on the left display.

Each time you press the ECO button (E), the spin decreases with

25 rpm ( min.500).

Each time you press the START button (S), the spin increases with 25 rpm

(max. 999).

Remark :

This function has to be selected before final spin has started.

17