4

End of a program

Remarks

At the end of a program, while the door is being released, the left display shows End and the Start-LEDis switched off. After that only the right display will continue to show the program number. This is the end of the program.

Rapid advance

This function allows to skip the rest or certain segments of the program. This function has to be specified during preprogramming and is mostly used by technicians and maintenance personnel.

Selection

 

Push the SELECT-button (P)

at the time the special

 

function needs to be activated and keep the button depressed.

 

Now push the upper hidden button simultaneously and release same. Only

 

now release the SELECT-button (P).

 

 

The central display now shows F5 and this function is now active.

 

Operation

 

Hidden buttons

By pressing and releasing

the lower hidden but -

ton and releasing it again, the programs skips to the next segment (if necessary, the program can be advanced to the end).

To return to the original wash program, press the upper hidden button.

Attention!

If F5 is activated during final spin, this segment of the program will be skipped as described above. It is however followed by a coast and tumble time to disentangle the linen. This special function prevents the user from opening the machine while the drum is still rotating and represents an important safety feature.

Premature ending of the program

By using the rapid advance function during the program, a program can be prematurely ended. When the end of a program is reached using this function, and as long as the water has not reached the safety level, the door will remain sealed and the display will show “SLE” (Safety Level) on the left display. Afterwards the display will temporarily show “End” on the same display. After that only the right display will continue to show the program number. This is the end of the program.

Remark:

If any attempt is made to interrupt the program prematurely during a spin phase of the program, all functions on the display will be temperary replaced by blinking horizontal dashes.After that only the right display will continue to show the program number and the door will be released. This is the end of the program.

23