Indications of program sequence

4

Display information

The left display will indicate the temperature of the wash bath - in °C or °F (on machines where this function has been selected).

The central display shows the remaining time to the end of the wash cycle.

For programs which are being run for the first time, the machine will take a theoretical time estimate. If this time indication does not correspond to the real cycle time, the cycle time will be corrected from the second cycle onwards (Self-Teaching function of the machine).

This function has to be specified during preprogramming.

The right display will continue to show the selected program number.

If a "Level-stop"was programmed (which halts the programmer during the filling of the cylinder) and/or a "Heat-stop"(which stops the programmer during the heating up of the wash bath, then the respective LED’s light up in the display. Once the required water level and/or temperature have been reached, the LED is turned off and the internal programmer advances again.

Wash cycle-LED’s

Each program segment has a corresponding LED. Each of these 6 LED’s light up when the appropriate segment is executed. This way, the program sequence can be accurately followed.

When a LED blinks, the machine is taking up water.

When a LED blinks slowly, the machine is heating up the water.

Spin-LED’s

When the water is drained at the at the end of a program segment and the machine spins if so desired, the left spin-LED(intermediate spin) will light up together with the cycle-LED.

- Functioning of the spin-LED’s during intermediate spin:

LED

drain/distribution

low spin

coast

Interm. spin

blinking rapidly

continuously

continuously

- Functioning of the spin-LED’s during gentle-intermediate spin:

LED

drain/distribution

low spin

coast

Interm. spin

blinking rapidly

blinking slowly

blinking slowly

During final spin, both the left spin-LED (intermediate spin) will light up together with the right spin-LED.

- Functioning of the spin-LED’s during final spin:

LED

drain/distribution

low spin

high spin

coast

tumble

Interm. spin

blinking rapidly

continuously

slowly

continuously

off

Final spin

continuously

continuously

slowly

continuously

rapidly

- Functioning of the spin-LED’s during gentle-final spin:

LED

drain/distribution

low spin

high spin

coast

tumble

Interm. spin

blinking rapidly

slowly

----

slowly

off

Final spin

continuously

continuously

----

continuously

rapidly

22