4
Cool down
This function allows to gradually lower the temperature of the wash bath to prevent creasing of the linen.
During a cool down, the remaining program time on the central display will be replaced by “cd”.
Power Failure
Should the power fall out during the program, the water will be drained and the door can be opened after maximum 3 minutes. When the door remains locked, and the power comes back up within 24 hours, the program will continue from there, where it was at the time of the power failure.
If due to breakdown, the door is not unlocked automatically, you have to remove the service panel (A) below and pull the ring (B), suspended on the left side, while opening the door.
B
A
Important:
Before opening the door, check that all the water has been drained from the tub and that the cylinder has come to a complete stop.
Central panel control (Option)
Here payment is done through the central panel and not directly into the machine. As soon as the payment is done, and a machine has been selected normally, “STA” appears blinking on the left display. The machine can be started by pressing the START button or the special START button, which has been built in on the spot of the coin meter (option).
Remark :
This option can only be used, when it has actually been programmed as such in the programmation.(REMOTE START).
For certain versions, PAY can appear on the left display when this operation is not active.
Therefore, “Remote PAY” was programmed in the programmation.
24