4
Machine with coin or token operation
Opening the door
Fill the drum
Open the door.
Sort the linen according to the type and required temperature of the linen. Empty all pockets of the garments so that no garments can be damaged and no left articles can cause damage to the machine. Turn sleeves of shirts, blouses inside out. It is recommended to mix small and large items to enhance the drop of the linen during the wash cycle and hence improve the wash quality. Wash loads of below 80% of machine capacity can obstruct the proper functioning of the machine and can damage the machine. Overloading the machine can also lead to a bad wash result.
Close the door
Select program
Add detergent
Start the machine
On machines with a coin or token meter, the programmer can contain up to 20 programs
By pressing the
It is recommended to only use detergents with a
Overdosing of detergents can lead to reduced wash results and “overfoaming” which can damage the machine.
Left compartment A: | Prewash (1st wash) |
Central compartment B: | Main Wash (2nd wash) |
Right compartment C: | Final Rinse (fabric softener) |
Bottom compartment D: | Direct access to tub |
The price will be displayed on the left display. The display will count down every time a coin is introduced into the coin meter. When the total price has been introduced into the machine, the display will be switched off and the machine will start.
During the first 2 minutes after starting, the program number is blinking and you can change the program in case of a possibly wrong selection.
To do so, select another program with the SELECT button (P). The new program will be started immediately.
If a more expensive program has been selected, the price difference with the previous program will be displayed. The new program will only start after this price difference has been introduced. If this has not been done within two minutes of selecting the new program, the machine will switch back to the original program and continue operating.
21