2Printer Operation
Setting the Media
6.Setting sensor positions.
When using a transparent sensor
Move the bottom sensor close to the center of the width of the media, then align the upper sensor marker and the bottom sensor marker (white) using the movable media guide.
When using media that is 4 inches wide, position the upper sensor and the bottom sensor all the way to the right (large
Upper sensor marker
Upper sensor
Aligned with the marker
Bottom sensor
Transparent sensor marker
Movable
Platen | media guide |
| |
| Front |
When using a reflective sensor
Adjust the position of the sensor so that the reflective sensor marker of the bottom sensor is at the center of the black mark of the media as shown below.
Media | Black mark |
Bottom sensor
Black mark
Reflective sensor marker
Platen
Front
24