Appendixes
Appendixes
Specifications
Item |
| Description |
|
|
Printing | Printing method | Thermal transfer/Direct thermal | ||
|
|
|
|
|
| Resolution | Main scanning line density: | 203 dots/inch (8 dots/mm) | |
|
|
| 300 dots/inch (11.8 dots/mm) | |
|
|
|
|
|
|
| Sub- scanning line density: | 203 dots/inch (8 dots/mm) | |
|
|
| 300 dots/inch (11.8 dots/mm) | |
|
|
|
| |
|
| Head 864 dots (printable dots: 832 dots) | ||
|
| Head 1275 dots (printable dots: 1240 dots) | ||
|
|
|
|
|
| Max. print width | 104 mm |
| 4.1 inch |
|
| 105 mm |
|
|
|
|
|
|
|
| Max. print length | 812.8 mm |
| 32 inch |
|
|
|
| |
| Print density | Print density is adjustable with software | ||
|
|
|
|
|
Printing speed | Printing speed setting | [For |
|
|
|
| 6, 5, 4, 3 or 2 inches per second (Direct thermal) | ||
|
| 4, 3 or 2 inches per second (Thermal transfer) | ||
•4, 3 or 2 inches per second when the optional peeler is used. [For
4, 3 or 2 inches per second
Print mode | Batch mode | Normal printing (single or multiple sheets) | |
|
|
|
|
| Tear off mode | Feeds back media to the | |
|
|
|
|
| Cut mode *1 | Prints while cutting at designated sheet units. | |
|
| The following two kinds of cut mode operations are done. | |
|
| • Backfeed |
|
|
| • Cut through |
|
|
| (Cut through refers to stopping present printing to cut the previous label | |
|
| when it reaches the cut position. After cutting, printing restarts but a gap | |
|
| may be created at the seam of the printing at this time.) | |
|
|
|
|
| Peel mode*1 | Peels labels from the liners after printing them. | |
Media | Types of media | Roll, fanfold |
|
|
| (continuous media, | |
|
|
|
|
| Recommended media | Thermal transfer: label media | |
|
| Direct thermal media: label media | |
|
| Mitsubishi Paper) |
|
|
|
|
|
| Max. media width | 118.0 mm | 4.65 inch |
|
|
|
|
| Min. media width | 19.5 mm | 0.77 inch |
|
|
|
|
| Min. label width | 19.5 mm | 0.77 inch |
|
|
|
|
| Min. label pitch*2 | 6.35 mm | 0.25 inch |
| Max. media thickness | 0.254 mm | 0.01 inch |
|
|
|
|
| Max. media length | 812.8 mm | 32 inch |
|
|
|
|
| Min. media length | 6.35 mm | 0.25 inch |
|
|
|
|
| Min. media thickness | 0.0635 mm | 0.0025 inch |
|
|
|
|
| Max. external diameter: 127mm | 5 inch | |
| diameter |
|
|
| Media core: 25.4 to 76 mm | 1 to 3 inch | |
|
| ||
|
|
|
|
Ribbon | Recommended ribbon | B110A Ricoh |
|
|
|
|
|
| Max. ribbon width | 114.0 mm | 4.50 inch |
|
|
|
|
| Min. ribbon width | 25.4 mm | 1.00 inch |
|
|
|
|
| Max. ribbon length | 360.0 m | 1,181 ft |
|
|
|
|
| Max. roll diameter | 74.0 mm | 2.90 inch |
|
|
|
|
| Inner diameter of the | 25.4 ± 0.25 mm | 1.00 ± 0.01 inch |
| paper core |
|
|
|
|
|
|
| Ribbon end tape length | Max. 80.0 mm | 3.15 inch |
|
|
|
|
| Ribbon end detection | Ribbon out detection by a tension sensor | |
|
|
|
|
55