
4.1Setting/Replacing Paper Rolls
1.Press the cover open button down.
2.Open the printer cover.
3.Insert a paper roll with the print surface facing down as shown on the figure below and pull the paper end out of the printer.
4.Close the printer cover until a click can be heard.
Cover open button
WARNING
●When opening the printer cover, take care not to touch the print head or cutter blade. Otherwise, burning or injury of hand may result.
CAUTION!
●Always use the specified types of paper roll.
●Confirm that the paper roll is set correctly.
●When the paper is skewed and not extended straightforward from under the cover, open the cover and adjust the paper correctly.
●When closing the cover, press on the both front sides marked or the center of the cover to close it firmly.
●When setting paper, pay attention not to let your fingers get injured by the edge of paper.
— 20 —