4.4 When the Printer Cover Cannot Be Opened
Cutter lock error may occur with the Auto Cutter due to dropping of foreign object, paper jam, etc. If the cutter blade remains protruded with cutter lock error, the printer cover does not open.
The Auto Cutter can also be restored to the initial position by turning the printer on again or by pressing the FEED button, when the memory
If the cutter lock error cannot be recovered by the above method, release cutter lock in the following procedure.
1.Turn the printer power off.
2.If a cutter lock error occurs, the printer cover is held unopened. To open the cover, open the cutter gear cover on the front of the printer, turn the cutter gear under the protection sheet in the arrow direction, and return the movable blade to the initial position. (Return the movable blade to the position where the printer cover can open.)
3.Open the printer cover and remove the cause of the cutter lock.
4.Set paper correctly, close the printer cover, and turn the printer power on. (Check to make sure ERROR LED goes off.)
CAUTION!
●Do not touch the printer head by hand just after printing because high temperature remains on it.
●Do not touch the surface of the heating element of the print head by bare hand or by metal.
●Do not touch the blade of the cutter.
Protection sheet
OR
APER
Cutter gear
Cutter gear cover
— 22 —