Manual Setting of Memory Switch (Memory SW)

The memory switch can be selected, changed, or written by the combination of three actions: pressing the FEED button, pressing and holding the FEED button, and opening or closing the printer cover.

1.Entering memory switch setting mode.

Set paper to the printer and keep the printer cover open. With the FEED button pressed and held, turn the printer power on, and then press the FEED button twice. Close the cover. If the current settings of the memory switch etc. are printed, the printer is now in the memory switch setting mode.

Memory SW (1) 00000000

0:

OFF state

1:

ON state

2.Selecting memory switch

When the FEED button is pressed button shotly (within 2 seconds), printing occurs in the order of “Memory SW1” → “Memory SW2” → “Memory SW3” → “Write/Factory Setting” → “Memory SW1” → ...... repeatedly. When the memory switch you want to change is reached, press and hold the FEED button (for more than 2 seconds). The reserved memory switch setting will be skipped and not printed.

3.Selecting each switch item

There are eight setting items for each switch. Press and hold the FEED button continuously, the printer goes to the next item and prints the current setting of the item. Repeat pressing and holding till the item you want to change setting is reached.

Power ON Info (Valid)

Items with ERROR LED lit are

those values elected currently

4.Changing the setting

When the item you want to change is reached, press the FEED button shortly. The changed set value is printed. (To return to the previous setting press the FEED button shortly). When you press the FEED button continuously, the set value is accepted and then the printer goes to the next setting item.

5.Returning to the memory switch select mode

When the setting of the desired content is completed, open the printer cover and then close the printer cover. This allows the printer to print the setting of the changed memory switch.

— 28 —