4.2 Removing Jammed Paper
1.Turn the printer power off.
2.Open the printer cover. If the cutter blade remains protruded with paper jammed, do not open the printer cover forcibly. Referring to section 4.4, restore the blade to the normal position and then open the cover.
3.Remove paper roll and clean the printer from any jammed paper or remaining small pieces of paper, then install the paper roll and close printer cover firmly.
4.Turn on the printer. The auto cutter mechanism is initialized and the alarm is cleared.
CAUTION!
●The print head is hot immediately after printing. Do not touch it with your hand. Do not touch the heating element of the head with a bare hand or metal object either.
4.3Cleaning the Print Head
1.Turn the printer power off.
2.Open the printer cover.
3.Wait several minutes. Wipe off any debris on the heating element of the head using a cotton swab soaked in isopropyl alcohol.
CAUTION!
●The print head is hot immediately after printing. Do not touch it with your hand. Do not touch the heating element of the head with a bare hand or metal object either.
— 21 —