Operation panel

POWER LED (green)

ERROR LED (red)

FEED button

zPOWER LED (green)

Lights when the power is on, turns off when the power is off. Flashes when data is incoming or a memory error has occurred.

The light dims when entering the energy saving mode and brightness slowly changes.

zERROR LED (red)

Flashes if the print head is hot, the paper cover is open, a cutter lock occurs, and so forth.

zFEED button

Press this button to feed paper.

In case of a cutter lock, remove the cause of the lock, close the paper cover, and then press the FEED button.

The printer enters the mode for setting memory switches and running self- printing.

Refer to 4.4 Self-printing

Refer to 4.6 Error Messages

Refer to 5.3 Manual Setting of Memory Switches

— 13 —