2.3 Other Built-in Functions

zBuzzer

Buzzes when errors occur or when operations or command operations are performed.

Refer to 4.6 Error Messages

zUser memory

You can save user-defined logo and character data in this memory. Data remains stored in this memory even if the printer is turned off. For information on how to save data, refer to the Command Reference.

zMemory switch

Setting of various kinds of functions can be stored in memory. Settings remain stored in the memory even if the printer is turned off.

zPower saving functions

•Power save mode

Enters power save mode to reduce energy consumption a set period after printing stops.

Exits power save mode when the FEED key is pressed or print data is received.

In power save mode the brightness of the POWER LED repeatedly changes slowly.

•USB power save mode (if memory switch MSW6-3 is set to enabled) The printer enters power save mode when the computer is turned off. When the PC is turned on the printer exits this mode.

The POWER LED dims in the USB power save mode.

CAUTION

„If the power is turned off in the USB power save mode, the printer does not exit the mode immediately after the power is turned on. The mode clears about one and a half minutes after the power is turned off.

„The printer enters this mode even if there is an error.

„The printer does not enter this mode during serial interface transmission.

— 16 —