The service life of the print head was increased by reducing the pressure that it contacts the paper.
Long Life Print (LLP) is enabled by changing the positions of the lever switches inside the paper cover.
1.Turn off the power.
2.Pull the cover open lever forward and open the paper cover.
3.Use a screwdriver or other pointed object to press the lever switches on both sides in the direction of the A arrows and lower them in the direction the B arrows. Lower the lever switches on the left and right sides one at a time from the standard to the LLP position.
4.Close the paper cover until you hear a click so it is secure.
B
B
Standard
LLP
(Front view of lever switch)
CAUTION
Be careful not to touch the opening for the auto cutter while the paper cover is open.
The print head is hot immediately after printing. Do not touch it.
Do not touch the print head with bare hands or metal objects.
Both the right and left side lever switches must be set in the same position.
The printout may be lighter when this setting is enabled. If necessary, increase the print density or use a paper that has good color development.
— 24 —