Citizen JNOXXX instruction manual Changing Modes

Changing Modes

The mode changes each time the
M button is pressed. The current mode during operation can be confirmed with the mode hand [4].

The modes change in the following sequence: [TME] ➡ [CAL] ➡ [AL-1] ➡ [AL-2] ➡ [AL-3] ➡ [CHR] ➡ [TMR] ➡ [SET]

The Time Difference Between the Cities Indicated by this Watch and Greenwich Mean Time

Using the Zone Setting Function

This page should be read with the watch diagram, on the first page of this manual, showing the location of the parts.

This watch can display the time in 30 cities of the world in sequence. Using the zone setting function allows you to skip the cities you do not wish displayed.

[ Preparation for zone setting ]

Press the
M (MODE) button to move the mode hand to [SET]. (At this point, the cities to be displayed or to be skipped can be confirmed by using either the
A [UP] or
C [DOWN] button.)

[ Zone setting – Display/No Display]

1.Pull the
M (MODE) button out to the setting position.

2.Use the
A (UP) button to select the cities.

3.Use the
B (SET) button to select either SET (display the time) or OFF (do not display the time).

4.Use the
C (SET) button to select daylight-saving time ON or OFF.

5.Push the
M (MODE) button to its normal position. Zone setting is now completed.

6.Press the
M (MODE) button to return the mode hand to [TME].

Adjusting the Time

This page should be read with the watch diagram, on the first page of this manual, showing the location of the parts.

Adjusting the time for one of the 30 cities will automatically adjust the time for the remaining cities according to the time differences.

[Preparation for time adjustment]

1.Press the
M (MODE) button to move the mode hand to [TIME].

2.Press either the
A (UP) or
C (DOWN) button to move to the desired city. The name of the city will

be displayed at [6].