4 Push the FEED button to feed the paper and stop it at the printing start position.

5 Holding the end of the roll paper, pull it toward you and cut of surplus paper.

Loading the Paper

Cover close location

Cover close location

Loading cut sheet paper
1 Open the cover of the cut sheet

2

paper insertion slot on the back of the printer.

If roll paper is loaded, remove it.

2 Turn on printer power then insert the paper into the cut sheet paper insertion slot on the back of the printer as far as possible; it will be automatically feed to the printing start position.

Cut sheet paper insertion opening

After the paper has been inserted and fed, check to make sure the paper is loaded straight. If it is bent, it might cause a paper jam.

To prevent the paper from being bent as it is loaded, do not use paper with its front edge torn or folded. (see Page 12)

When paper is used up during printing

When paper is used up during printing, printing stops and the ERROR LED flashes red. When this happens, do not turn off the printer power. If you do, any remaining printing data will be erased.

27