Operating the Printer

Connecting the printer to a PC or other communication device

Connecting with a Bluetooth Interface

The Bluetooth interface is only available on a Bluetooth Version printer.

1 Bluetooth is automatically selected in the factory. However, if you printer’s configuration has been changed, you may need to select it again using the interface selection mode. (See page 43)

Flashing (Orange)

If the Bluetooth interface is installed when the printer is shipped from the factory, it is not necessary to do the setting.

2 Setting the printer with the connected device.

See the Users manual for each connected device.

Wireless Communication Precautions

Many industrial, scientific, medical devices, wireless networking and items such as Microwave ovens all operate in the same frequency band as this Bluetooth version device. Our device is manufactured to ensure it complies with all normal operation standards for such a device. However, we recommend that you follow these precautions to ensure full compatibility in your environment:

1.Before using this device, check to make sure that no other systems that are susceptible to interference from a radio transmission device. Such systems may also include power conservation wireless systems used to distinguish items moving nearby.

2.If this device does cause interference, immediately stop using the device. Consult your supplier about changing the frequency of operation or measures to prevent interference such as installing partition walls.

32