Citizen PD-24 41

Setting the Modes

Top Menu	Sub Menu	Initial values	Setting range	Remarks

Interface	Cable IF data	8 bit	8 bit	Sets the data length.
settings	length		7 bit	(Valid only for RS232C
				interface.)

	Cable IF parity	None	None	Sets the parity.
			Odd	(Valid only for RS232C
			Even	interface.)

	Cable IF stop bit	1 bit	1 bit	Sets the stop bit
			2 bit	(Valid only for RS232C
				interface.)

	Cable IF flow	Xon/Xoff	Xon/Xoff	Sets the flow control
	control		DTR/DSR	(Valid only for RS232C
				interface.)

	IrCZ Baudrate	9600	9600	Sets the communication speed
			19200	of the Citizen infrared interface
			38400

	IrCZ stop bit	1 bit	1 bit	Selects the stop bit of the
			2 bit	Citizen infrared I/F.

	Bluetooth mode*3	Normal (no pin	Normal (no pin code)	Sets Bluetooth mode
		code)	Bond (with pin code)	(Valid only for Bluetooth
				interface)


	BOND history	invalid	Invalid	Sets Bond history deletion		4
	deletion*4		Valid	(Valid only for Bluetooth
				interface)

	Bluetooth	Discoverable	Discoverable	Sets Bluetooth inquiry
	inquiry*5		Non-Discoverable	(Valid only for Bluetooth
				interface)

	Bluetooth pin	Default	Default	Sets Bluetooth pin code
	code*6		Optional designation	(Valid only for Bluetooth
				interface)

	Bluetooth	Invalid	Invalid	This menu sets Bluetooth pin
	encryption*7		Valid	code, but prints only during
				“Optional designation”

41

Contents

User's Manual Latest Information Printer Drivers, Servicing and Consumables Contents Page DECLARATION OF CONFORMITY Compliance Statements Safety Instructions 7Precautions to be followed when handling the printer 7Precautions to be followed when operating the printer 7Precautions when using the battery pack 7Precautions when using the charger (optional) 7Precautions when using the specialized RS-232Ccable and USB cable 7Precautions when using thermal paper (printing paper) 7Precautions when installing the printing paper Confirming the Accessories External Appearance and Part Descriptions 3Serial Interface 4USB Interface Strap Holder 6Optical Receiver 7AC Adaptor Terminal Cover LED panel 1POWER LED 2STATUS LED 3ERROR LED Functions of the LED LED Indicator Table Inside the Printer 1 Paper Feed Roller 2Paper Holder 3Cover Open Sensor Switch 4Paper End/Black Mark Detection Sensor Back of Printer 1 Power Switch opening 3 Roll paper cover Printer Underside Installing the Battery Pack Battery Pack Charging Method 7Error indications during charging 7Charging warning 7Charging error When there is a battery pack or printer problem Charging with the External Charger Option Charging method The POWER LED lights up steady red 2 Insert the battery pack into the When to charge the battery pack About the Power Source Loading the Paper Loading Roll Paper 1 Turn on the printer power and push the cover open buttons with both hands to open the roll paper cover Loading cut sheet paper 1 Open the cover of the cut sheet paper insertion slot on the back of the printer When paper is used up during printing Connecting the printer to a PC or other communication device Connecting with the Infrared Interface Connecting with a Cable 7Connecting with the RS-232Ccable Precautions When Using the Connector Cable Turn off the power to the printer and the device to be connected Insert the cable connector straight into the printer’s serial port 7Connecting with a USB cable 1 Turn off the power to the printer and the device to be connected 2 Insert the connector of the cable straight into the USB port on the printer Connecting with a Bluetooth Interface 2 Setting the printer with the connected device Wireless Communication Precautions Setting the Modes Printer Settings HEX Dump Print Mode 1 With the paper loaded, hold down the FEED button and power switch 2 Press the FEED button to turn off Menu Setting Mode 7Entering Menu Setting Mode 7Setting Procedure Page Page 7Menu Setting Table Page Page Page Interface Selection Mode Care and Maintenance Troubleshooting Specifications Page Page Page Interfaces Infrared interface 7IrDA method 7IrCZ method USB Interface 7Specifications 7Pin Layout Wireless (Bluetooth) Interface (Option)