CITIZEN OPOS DRIVER 1.8 Application Development Guide
2.6. POS Printer Service Object and Precautions
ClaimDevice Method
No identical serial port (COM*) specified by the Windows driver is not usable in the connection of serial interface. When this method is executed in this connection, “OPOS_E_TIMEOUT” is returned.
PrintBarCode Method/RotateSpecial
・Supported barcodes
PTR_BCS_UPCA, PTR_BCS_UPCE, PTR_BCS_EAN8, PTR_BCS_JAN8, PTR_BCS_EAN13,
PTR_BCS_JAN13, PTR_BCS_ITF, PTR_BCS_CODABAR, PTR_BCS_CODE39, PTR_BCS_CODE93, PTR_BCS_CODE128, PTR_BCS_UPCA, PTR_BCS_UPCE
・About
This printer compresses the 11- or
Ex: Set the original code to be
follows:
1) When all V through Y are"0"
3) When DE and VWX are "0"
4)When DE and VW are "0" and C is "0", "1", or "2":
①When C = "0":
②When C = "1":
③When C = "2":
The check digit is automatically calculated in the printer. When a condition other than the above is specified and executed, error (OPOS_E_ILLEGAL) is returned because the printer cannot print due to its specification requirement.
・About rotating printing of symbol
Available rotating direction is 0° and 180° (all models).
RotatePrint Method
Print size changes dynamically up to the value of RecSidewaysMaxChars depending on the print data. Rotate print in NV bit image mode is not supported. For NV bit image mode, refer to “SetBitmap Method/ESC#B Escape Sequence in 2.6 POS Printer Service Object and Precautions”.
43