Chapter3 Preparing the Printer
Connecting the Power
1. Make sure that the printer power switch is set to OFF.
2. If your printer is an AC adapter type, insert the AC adapter cable connector with its flat side upwards into the power connector on the rear surface of the printer.
If your printer is a
Caution
Do not use an AC adapter other than the stipulated product (Model 51AD).
Always hold the connector when inserting or removing the cable connector of the AC adapter.
Stretching the power cord by pulling it will damage it, causing fire, electric shocks, or a break in the conductor.
When lightening is striking nearby, remove the plug of the power cord from the outlet. Lightening will cause fire or electric shock.
Do not place the power cord near a heating device. The cover of the power cord will melt, causing fire or electric shock.
When the printer will not be used for a long period, be sure to remove the plug of the power cord from the outlet to guarantee safety.
Isolate the AC power source from other devices that generate noise.
AC adapter cable
Flat side of the cable is up.
AC adapter type
AC inlet
22