Chapter5 Appendixes
Specifications
Printing mode | Serial impact dot matrix |
| |
Printing direction |
| ||
Head pins | 9 pins (φ: 0.3mm, Pin interval; 1/72inch) | ||
Printing line columns | Paper width of 76.2mm | 40/42 or 33/35 columns | |
| Paper width of 69.5mm | 36/40 or 30/32 columns | |
| Paper width of 57.5mm | 30/33 or 25/27 columns | |
| 200/400 dots (full dot/including half dot) | ||
|
|
| |
Font configuration | 7Ω9 or 9Ω9 dots |
| |
Character types | ASCII (96 characters), International characters, Katakana | ||
| Code pages: 437, KATAKANA, 850, 860, 863, 865, 852, 866, 857, 858, WPC1252 | ||
|
| ||
Panel/switches | 1 switch (FEED), 3 LED (POWER/PAPER OUT/ERROR), 1 buzzer | ||
Printing speed | Printing: | 240CPS (3P paper 200CPS) | |
| |||
|
| 69.5mm wide, 36 columns (7Ω9+3sp, 6LPI) 5.4LPS | |
|
| 57.5mm wide, 30 columns (7Ω9+3sp, 6LPI) 6.0LPS | |
|
|
| |
Paper feed | Friction feed |
| |
| Minimum pitch: 1/144 inch | ||
| Paper feed speed: 40LPS (6LPI) | ||
|
|
| |
Paper | Types: | 1P roll paper | |
|
| 2P copy roll paper (1 original + 1 copy) | |
|
| 3P copy roll paper (1 original + 2 copies) | |
|
| * When 3P, printing speed falls 16% | |
| Paper widths: 76.2 / 69.5 / 57.5 (±0.5)mm | ||
| Roll diameter: φ30mm to φ83mm | ||
| Core diameter: Interior diameter | ||
| Paper thickness: 1P 0.06 to 0.085mm | ||
|
| Copy paper 0.05 to 0.20mm (total thickness) | |
|
| But the total thickness that can be cut is from 0.05 to 0.14mm. | |
| * No glue on the core or end of the paper. | ||
|
| ||
Ribbon | Method: special ribbon cassette | ||
| Colors: | Single color (purple, black), 2 color (black and red) | |
| Life: | Purple, approx. 4 million characters (continuous printing at 25°C) | |
|
| Black, approx. 3 million characters (continuous printing at 25°C) | |
|
| Red/black, black 1.5 million characters, Red 750,000 characters | |
|
| ||
Interface | Standard model: 2 models, either RS232C or IEEE1284 | ||
Emulation | ESC/POS (Page mode) |
| |
| CBM mode, STAR mode |
| |
|
|
|
|
44