Feature | Parameters |
Bluetooth interface | Transfer method: Bluetooth 1.2 compliant |
Frequency: 2.4 GHz | |
| Modulation method: FH method (Frequency |
| hopping spectrum diffusion method) |
| Hypothetical interference distance: 10 m |
| Transfer rate: 723.2k/57.6k bps (Transfer rate |
| between Bluetooth module only) |
| The communication speed between Bluetooth and |
| the printer is 115.2kbps. |
| Transfer capacity: Up to +4 dBm (Class 2 & Class 3) |
| Coding: 128 bit |
| Security level: Link |
| Standard PIN specification: Prepared (16 digits) |
| PIN code: Lower 4 digits of the BD address |
| Profile: Serial Port Profile |
Serial interface | Speed: 1200, 2400, 4800, 9600, 19200, 38400, 57600, |
| 115200 bps |
| Interface: Bidirectional serial communication |
| Signal level: |
| Data lenght: 8 bits |
| Start bit: 1 bit |
| Stop bit: 1 bit |
| Parity: None |
| Flow control: Xon/Xoff |
| Connector: Motorola Star Tac |
Input buffer | 64 KB |
Mag stripe reader | Track 1, 2, 3 |
LED color | Power LED: GREEN and RED |
| Charge LED: GREEN and RED |
Operation switches | Power switch 1, LF switch 1 |
Sensors and error monitoring | Paper end sensor, Open cover sensor, |
| Head temperature, Low battery |
Power consumption | Idle - approximately 2W |
| When printing - approximately 15W |
Battery | Battery type: |
| Cell Voltage: 3.7 V |
| Number of cells: 2 |
| Battery pack voltage: 7.4 V |
| Battery pack capacity: 2000 mAh |
Battery charging time | Approximately 3 hours by main unit + AC adapter |
Maximum lines printed with | 30,000 lines |
fully charged battery | (At temperature 20°C, standard setting, |
| alphanumeric slide pattern printing. The number of |
| lines may be changed by such condition as |
| temperature, etc.) |
— 14 —
