Citizen Systems iDP-3535

iDP-3535 User’s Manual

CITIZEN 26/38

7-2 Dip-Switch (DS-2) Setting

(only for Serial Interface)

No. Functions ON OFF Factory

Setting

1to chose

Word's Length 7 bit 8 bit OFF

2Parity Checking No Yes ON

3Parity Checking Even Odd OFF

4Baud rate - see the table below - OFF

5Setting ON

6On-Line Mode *1 DC3 DC3 OFF

LF code DESELECT code

7 - not used - OFF

8 - not used - OFF

Baud rate Selection

No. 1200 2400 4800 9600

4OFF ON OFF ON

5OFF OFF ON ON

Your iDP3535 Dot Matrix Printer (Serial Interface model only) has been upgraded to provide you with

a new feature is called ‘OLMODE’ or ON - Line Mode. In this mode, the SEL (select) switch on

the operator panel is not used and the printer is always in the ‘SEL’ (selected) or ON – Line Mode.

Also, the LF (linefeed) switch on the operator panel will function while the printer is this mode,

even when the printer is in the ‘SEL’ (selected) Mode.

This feature is activated by placing the Dip Switch DS-2, Number 6 in the ‘ON’ position.