Citizen Systems iDP-562 user manual Foreign character DSW-4

iDP-562 User’s Manual

6.2 Setting the Dip Switch

IDP562CNL / CN has Dip Switch with which you can select the followings to meet your computer’s function. Selection of “CR” and “LF” code function.

Please refer to the table below.

	DSW-1		DSW-2		DSW-3
	CR and LF code	When CR code comes
	are valid function.	immediately after full		When the buffer is blank.
*OFF	CR code is selected	buffer printing
	by the DSW-2
	and 3.	*OFF	CR code is void	*OFF	CR code is valid
		ON	CR code is valid	ON	CR code is void
	CR code is ignored	When LF code comes
	LF code is valid.	immediately after full		When the buffer is blank.
ON	LF code is selected	buffer printing
	by the DSW-2
	and 3.	*OFF	LF code is void	*OFF	LF code is valid
		ON	LF code is valid	ON	LF code is void

It is recommended to set the DIP switches in accordance with your host’s output DATA format.

DATA Form		DSW-1	DSW-2			DSW-3
DATA + CR		OFF	OFF			OFF
DATA + LF
DATA + CR + LF		ON	OFF			OFF
DATA + LF + CR
					USA			GERMANY		FRANCE	UK
Foreign character
	DSW-4			*OFF					OFF	ON	ON
Selection
	DSW-5			*OFF					ON	OFF	ON
DSW-6
¯							Not for use
DSW-10
NOTE: *Marks are a “Factory Setting”

CITIZEN 23