Mixed-Mode System On Rear; Full-Range
Speakers On Front
| FREQ (hz) | L (mH) | C (uF) | |
| | | | |
| 80 | 8.0 | 497 | |
| 100 | 6.4 | 398 | |
| 125 | 5.1 | 318 | |
| 150 | 4.2 | 265 | |
| 200 | 3.2 | 199 | |
| | | | |
| | | | |
NOTE: Chart values based on 4 ohm speakers.
Figure 7 - The amplifier can be configured for a mixed-mode operation on either channels 1/2 or 3/4 amplifier sections. The table provides component values to create a 6dB per octave crossover at specified frequencies. Use components that have a + 5% tolerance and capacitors rated at 100V. NOTE: Choose the same frequency for both LP and HP crossovers. Do not overlap frequencies, as this may damage the amplifier.
