4 Channel Power System Amplifier
Mixed-Mode System On Rear; Full-Range
Speakers On Front
FREQ (hz) | 200 | 4.2 |
80 | L (mH) | 3.2 |
| C (uF) |
100 | 8.0 | |
125 | 6.4 | 497 |
150 | 5.1 | 398 |
| | |
NOTE: Chart values based on 4 ohm speakers.
Figure 7 - The amplifier can be configured for a mixed-mode operation on either channels 1/2 or 3/4 amplifier sections. The table provides component values to create a 6dB per octave crossover at specified frequencies. Use components that have a + 5% tolerance and capacitors rated at 100V. NOTE: Choose the same frequency for both LP and HP crossovers. Do not overlap frequencies, as this may damage the amplifier.
10