Manuals / Clarion / Home Audio / Stereo Amplifier

Clarion APX401.4 Setting the Gain, Setting the Crossover, Setting the Bass Boost

Models: APX401.4

1 16
Download 16 pages 15.16 Kb
Page 13
Image 13

Owner’s Manual

SETTING THE GAIN

After completing the installation, follow these steps to set the Gain Control and then perform the Final System Checks.

1.Turn the Gain Control all the way counter-clockwise.

2.Turn the vehicle’s Ignition Switch to the ON position. Then turn the ON/OFF Switch on the source units to the ON position. Set all Tone or Equalization Controls to “flat” positions and turn Loudness off.

3.Play a CD or Tape and set the Volume Control at 75% of full level. NOTE: If the system uses an equalizer, set its frequency controls to “flat” positions.

4.Slowly increase the Gain Control. Stop when you hear a slight distortion of audio.

SETTING THE CROSSOVER

The Clarion APX401.4 features fully adjustable front and rear crossovers. To set the crossovers, follow these steps.

1.Using the X-Over Mode Switch, select the desired mode: LP for Low Pass, HP for High Pass or OFF for Full Range.

2.Using the Freq (Hz) Selection Control, select the desired frequency. If the desired frequency exceeds the range of the Freq (Hz) Selection Control, press the Crossover Frequency Multiplier Switch to increase the value by a multiplier of 10.

• For example, 55Hz x 10 = 550Hz or 550Hz x 10 = 5.5kHz.

3.Repeat steps 1 and 2 for both the front and rear crossovers.

SETTING THE BASS BOOST

1.Initially set the Bass Boost control to its full left position (i.e. 0dB).

2.Listen to a variety of music styles (e.g. Rock, Rap, etc.) and slowly increase the Bass Boost control until a noticeable increase in low bass response is perceived.

3.Slowly adjust the Bass Boost control (up or down) to realize the best bass response.

CAUTION: If you hear a “pop” (due to speaker over-excursion), lower the Bass Boost to prevent speaker damage. If the system sounds muddy and distorted (due to amplifier clipping), lower Bass Boost to avoid shutdown from overheating.

13

Page 12 Page 14
Page 13
Image 13
Clarion APX401.4 installation manual Setting the Gain, Setting the Crossover, Setting the Bass Boost
Page 12 Page 14

APX401.4 specifications

The Clarion APX401.4 is an excellent addition to any audio enthusiast’s collection, designed to deliver superior sound quality and performance in a compact format. This four-channel amplifier is engineered to enhance your car audio system with crystal clear sound and powerful output, making it a popular choice among novice and seasoned users alike.

One of the standout features of the APX401.4 is its robust power output. It is capable of delivering 50 watts RMS per channel at 4 ohms, with the potential to drive up to 100 watts RMS per channel at 2 ohms. This flexibility allows users to connect a variety of speakers and subwoofers to suit their audio preferences, whether they are looking for deep bass or crisp highs.

The amplifier utilizes a Class AB design, which is well-known for its efficiency and sound quality. This design offers the best of both worlds—providing high levels of power while minimizing distortion. The result is a clean and rich audio experience, making it ideal for those who appreciate detailed sound reproduction across a range of frequencies.

Additionally, the APX401.4 incorporates advanced technologies such as a high-level input feature, allowing for direct connection to factory-installed head units that do not have preamp outputs. This makes it accessible for installation in various vehicles without the need for significant upgrades to the existing audio system.

The amplifier also comes equipped with an adjustable low-pass filter and a high-pass filter. This feature enables users to tailor the crossover frequencies to achieve a more precise sound profile based on their specific speakers and listening preferences. Whether you want to eliminate unwanted distortion from higher frequencies or enhance bass response, this amplifier provides the necessary tools to fine-tune your audio output.

For those concerned with durability and longevity, the Clarion APX401.4 is built with high-quality components and a robust chassis design that can withstand the rigors of automotive environments. Its compact size allows for easy installation in a variety of spaces within the vehicle.

In summary, the Clarion APX401.4 is a powerful, efficient, and flexible four-channel amplifier that enhances any car audio setup. With its impressive power capabilities, advanced technology, and user-friendly features, it’s an outstanding choice for anyone looking to elevate their in-car listening experience.