5. DCP
The control panel can be detached to prevent theft. When detaching the control panel, store it in the included DCP case to prevent scratches.
We recommend taking the control panel with you when leaving the car.
Removing the DCP
1.Turn off the power.
2.Press the [RELEASE] button.
[RELEASE] button
DCP
*The DCP is unlocked.
3.Remove the DCP.
CAUTION
Do not insert the DCP from the left side. Do- ing so may damage it.
Attaching the DCP
1.Insert the right side of the DCP into the main unit.
2.Insert the left side of the DCP into the main unit.
2.
DCP
1.
Storing the DCP in the DCP Case
Hold the DCP, in the orientation as shown in the figure below, and put it into the supplied DCP case. (Ensure the DCP is in the correct orienta- tion.)
DCP 
DCP case 
CAUTION
•The DCP can easily be damaged by shocks. After removing it, place it in its case and be careful not to drop it or subject it to strong shocks.
•When the [RELEASE] button is pressed and the DCP is unlocked, the car’s vibrations may cause it to fall. To prevent damage to the DCP, always store it in its case after detaching it.
•The connector connecting the source unit and the DCP is an extremely important part. Be careful not to damage it by pressing on it with fingernails, pens, screwdrivers, etc.
DCP Rear Panel | Source Unit Front |
DCP
connectorSource unit connector
Note:
• If the DCP is dirty, wipe off with a soft, dry cloth.
AX430 5
