Digital Radio / DAB Operations
INFO (Announcement)
In INFO standby mode, when the selected announcement programme starts, the main unit switches to the selected announcement pro- gramme automatically.
4.Perform the following operation depending on the connected model.
Turn the Rotary knob $ clockwise or counterclock wise to set the information item for ON or OFF.
5.Press ADJ button 2 to return to the previous display.
English
●Setting INFO standby mode
If you press and hold ISR button 9 for 1 second or longer, “INFO” lights in the display and the main unit is set into INFO standby mode until the se- lected announcement is broadcast. When the selected announcement broadcast starts, the announcement item appears in the display. If you press and hold ISR button 9 for 1 second or longer while the selected announcement broad- cast is being received, the selected announce- ment broadcast reception is cancelled and the main unit goes into INFO standby mode.
●Cancelling INFO standby mode
To cancel INFO standby mode, press and hold ISR button 9 for 1 second or longer.
●Information select
This is a function for selecting INFORMATION ON or OFF in Information interrupt mode.
You can set ON up to 6 information items.
You can select any of the 6 items below:
INFORMATION item
ENGLISH | Contents |
TRAVEL | TRANSPORT FLASH |
WARNING | WARNING / SERVICE |
NEWS | NEWS FLASH |
WEATHER | AREA WEATHER FLASH |
EVENT | EVENT ANNOUNCEMENT |
SPECIAL | SPECIAL EVENT |
1.Perform the following operation depending on the connected model.
Press and hold ADJ button 2 for 1 second or longer.
2.Press the right or left SEARCH button % to select “INFO SEL”, then push ENT button # to enter “INFO SEL” mode.
3.Press the right or left SEARCH button % to select an information item.You can select any of 6 items:
Switching the PTY and INFO display language
You can select one of 2 languages (English or French) for the PTY and INFO shown in the dis- play.
∗The factory default setting is “English”.
TA (Traffic Announcement)
In TA standby mode, when a traffic announcement broadcast starts, the traffic announcement broad- cast is received as top priority regardless of the function mode so you can listen to it. Traffic programme (TP) automatic tuning is also possible.
∗This function can only be used when “TP” is lit in the display. When “TP” is lit, this means that the RDS broadcast station being received has traffic announcement programmes.
●Setting TA standby mode
If you press ISR button 9 when only “TP” is lit in the display, “TP” and “TA” light in the display and the unit is set into TA standby mode until a traffic announce- ment is broadcast. When a traffic announcement broadcast starts, “TRA INFO” appears in the display. If you press ISR button 9 while a traffic announce- ment broadcast is being received, the traffic announce- ment broadcast reception is cancelled and the unit goes into TA standby mode.
●Cancelling TA standby mode
With “TP” and “TA” lit in the display, press ISR button 9. The “TA” in the display goes off and TA standby mode is cancelled.
∗If “TP” is not lit, pressing ISR button 9 searches for a TP station.
●Searching for a TP station
When “TP” is not lit, if you press ISR button 9, “TA” in the display lights and the unit automati- cally receives a TP station.
Note:
•If a TP station is not received, the unit continues the search operation. Pressing ISR button 9again goes off “TA” in the display and stops TP station searching.
28 AXZ610
