Clarion AXZ610 owner manual Error Displays, Tape

10. ERROR DISPLAYS

If an error occurs, one of the following displays is displayed.

Take the measures described below to eliminate the problem.

		Error Display	Cause	Measure
		ERROR 1	Tape cannot be played due to defective	Eject the tape then replace it with a new
			tape such as cut tape.	one.
English	Tape
		ERROR 2	Tape is caught and cannot be played.	consult your store of purchase.
				Remove the caught or wound tape.
		ERROR 4	Tape mode cannot be detected.	This is a failure of tape mechanism and
		ERROR 8	Tape is caught and cannot be ejected.	Eliminate the reason for which the tape is
				caught.
		ERROR 2	A CD inside the CD changer is not loaded.	This is a failure of CD changer’s mecha-
	changerCD			nism and consult your store of purchase.
		ERROR 6	A CD inside the CD changer cannot be	Eject the disc then reload it properly.
		ERROR 3	A CD inside the CD changer cannot be	Replace with a non-scratched, non-warped
			played due to scratches, etc.	disc.
			played because it is loaded upside-down.
		ERROR H	Displayed when the temperature in the MD	Lower the surrounding temperature and
			changer is too high and playback has	wait for a while to cool off MD changer.
			been stopped automatically.
	changer	ERROR 2	An MD inside the MD changer is not loaded.	This is a failure of MD changer’s mecha-
				nism and consult your store of purchase.
		ERROR 3	An MD inside the MD changer cannot be	Replace with a non-scratched, non-warped
	MD		played due to scratches, etc.	disc.
		ERROR 6	An MD inside the MD changer cannot be	Eject the disc then reload it properly.
			played because it is loaded upside-down.
			Displayed when a non-recorded MD is	Load a pre-recorded MD in the MD
			loaded in the MD changer.	changer.

If an error display other than the ones described above appears, press the reset button. If the problem persists, turn off the power and consult your store of purchase.

32 AXZ610