Tape Operations
English
Loading a tape
1.Press OPEN button 1 to access the cassette tape insertion slot behind the FLIP DOWN PANEL.
2.Load a tape into the cassette tape insertion slot. “LOADING” appears in the display and
starts playing.
∗When a metal or chrome bias (70µ sec) tape is inserted, the metal tape setting is selected auto- matically.
3. Close the FLIP DOWN PANEL.
Ejecting a tape
1.Press OPEN button 1to access the cassette Eject button & behind the FLIP DOWN PANEL.
2.Press Eject button & to eject a tape and take it out.
3.Close the FLIP DOWN PANEL.
CAUTION
Be careful not to catch your hand or fingers while closing the FLIP DOWN PANEL.
CAUTION .
Be careful not to catch your hand or fingers while closing the FLIP DOWN PANEL.
Notes:
•If the FILP DOWN PANEL does not open fully, gen- tly open with your hand.
•Do not leave the FLIP DOWN PANEL open. Be sure to close it to avoid any possible mechanical damage.
•Do not put your hands, fingers or foreign objects into the cassette tape insertion slot.
•When a tape has already been loaded in the cas- sette tape insertion slot, another one cannot be inserted into it. Never try to insert another tape forcibly.
Listening to a tape already inserted
Press FNC button 3 to select the tape mode. The tape starts playing automatically. If no tape is loaded in the unit, “NO CASS” appears in the display.
Pausing tape play
1.Press Play/pause button # to pause tape playback. “PAUSE” appears in the display.
2.Press Play/pause button # again to resume tape playback.
Notes:
•If the FILP DOWN PANEL does not open fully, gen- tly open with your hand.
•The radio mode is selected automatically 4 sec- onds after Eject button & is pressed.
If the auto antenna terminal for this unit is con- nected, the antenna is extended automatically. If you are in a location where the antenna may strike something, press FNC button 3 to switch the mode.
Switching to the other side of the tape
Press PROG button ! to change tape direction and playback.
∗The tape mechanism automatically reverses direc- tion and engage playback at the end of the tape (auto reverse).
Fast-forwarding/rewinding
●FF(fast-forward):
Press the right side of SEARCH button %.
●REW(rewind):
Press the left side of SEARCH button %.
●Canceling FF/REW: Press Play/pause button #.
∗When the end of the tape is reached with FF/REW, the mechanism automatically reverses tape direc- tion and resumes playback.
∗If you select another mode during FF/REW, it is selected with FF/REW continued.
The mechanism automatically makes FF/REW stop when the end of the tape is reached.
This function is called “monitor mode”.
14 AXZ610
