4. INTRODUCTION TO BLUETOOTH ® “PAIRING”

Automatic Connection

The Bluetooth® wireless function in your phone has to be turned on to establish automatic connection.

1.The Transceiver will establish an automatic connection in the following situations:

•After a previously successful connection, and the Transceiver is switched on again, it will automatically try to re-connect with the last paired mobile phone (Depends on multiple re-connection mode). Connection may take up to a minute depending on the mobile phone.

•Some mobile phones will require user confirmation for Bluetooth® connection. In such case, user will need to acknowledge the connection on the mobile phone before the connection is re-established.

2.The Transceiver will not establish an automatic connection or fail to connect in the following situations:

•If the mobile phone already has connection with other handsfree/ headset

•If the paired mobile phone is powered off and on (depends on mobile phone)

•If the paired mobile phone is out of range

•If the paired mobile phone is powered on after the Transceiver is turned on where multiple re-connection mode set to off.

In such cases, the user will need to manually re-connect to the Transceiver through the mobile phone.

Note:

• If the Transceiver is switched off, some mobile phones may take a long time to detect the disconnection.

BLT370 13