5.OPERATIONS FOR BLUETOOTH ® AUDIO/MOBILE- PHONE TRANSCEIVER UNIT

Basic Operations

Turning on the power

The unit turns on immediately when power is supplied. It can only be turned off if car engine is off.

Resetting the Transceiver unit

This function is used to restore to factory default setting and clear all the pairing information.

1. Press the [RESET] button once to perform reset function.

Notes:

• Transceiver will remain as power on state.

• The previously-connected device(s) may still hold the Transceiver information. Thus if the device initiate a Bluetooth® connection when the Transceiver is in pairing

mode, the connection may be successful.

Activating Bluetooth® Transceiver pairing mode

1. Turn on the Transceiver by powering up the car audio system, note that the Red LED blinks once every 5 seconds to confirm that the power is on.

2. Press and hold the [] and [] buttons simultaneously for 2 seconds or longer to activate Bluetooth® pairing mode.

Note:

• If no device is paired to the Transceiver after 3 minutes, pairing mode will be cancelled.

For more information on Bluetooth® pairing, please see chapter “Pairing Sequence” on page 11.

BLT370 17