5.OPERATIONS FOR BLUETOOTH ® AUDIO/MOBILE- PHONE TRANSCEIVER UNIT

Using Handsfree with Bluetooth® Wireless Technology

Note: The Clarion car stereo must activate the telephone interrupt mode to be able to work with the Transceiver. Please refer the car stereo owner’s manual of each

model for details.

Making a call

Calling with the phone’s keypad

1.Using the phone keypad, dial the phone number.

2.Press the phone “SEND” key - the phone is now connected to the Transceiver and your car stereo system will be muted. Talk as normal to the Transceiver unit, the voice of the person you’re talking to will be heard through your car speaker.

Incoming call

A ringing tone will be heard. The red and blue LED will alternate blink quickly. Any music streaming will be temporary muted until a call is ended or rejected.

Answering a call

Whenever your car stereo is operating, the Transceiver unit is in standby mode awaiting the next call, when an incoming call arrives, the car stereo is muted automatically and the ring tone is reproduced through your car’s speaker. 1. Press the [] button once to answer the call and speak as normal.

You may also answer the call by using your phone’s answer keypad. In this case, you can transfer the call to the Transceiver by following the instruction in the section “Transferring a call” on page 22. However, some phones will require user to activate transfer call via the phone itself in this case.

Note:

• The Clarion car stereo must activate the telephone interrupt mode to be able to work with the Transceiver. Please refer the car stereo owner’s manual of each model for details. Make sure that your mobile phone has set the Transceiver as the default headset/handsfree. Please refer your mobile phone owner’s manual for the

relevant setting.

BLT370 21