Basic Operations

3-1. Each time you turn the [ROTARY] knob to select the setting, the setting changes in the following order:

“THROUGH” “60” “90” “120”

∗The factory default setting is “THROUGH”.

Adjusting the subwoofer output volume

You can adjust the volume output from the unit’s subwoofer output terminal.

2-1. Select “S-W VOL”.

3-1. Turn the [ROTARY] knob to increase or decrease the subwoofer volume.

∗The factory default setting is “0”. (Adjustment range: +6 to –6)

Setting the phase

2-1. Select “PHASE”.

3-1. Turn the [ROTARY] knob to select as following order:

“NORMAL” “REVERSE”

∗The factory default setting is “NORMAL”.

Adjusting the high pass filter

2-1. Select “HPF”.

3-1. Each time you turn the [ROTARY] knob to select the setting, the setting changes in the following order:

“THROUGH” ↔ “60” ↔ “90” ↔ “120”

∗The factory default setting is “THROUGH” (through).

Note:

•During SOUND adjustment mode, if no operation is performed for more than 10 seconds, this mode can be cancelled and return to previous mode.

English

CX501 11