5. OPERATIONS
Note:
• Be sure to read this chapter referring to the front diagrams of chapter “3. CONTROLS” on page 6.
Basic Operations
English
CAUTION
Be sure to lower the volume before switching off the unit power or the ignition key. The unit remembers its last volume setting.
Turning on/off the power
1.Press the [SOURCE] button to turn on the power.
2.Press and hold the [SOURCE] button (1 sec.) to turn off the power for the unit.
Selecting a mode
1.Press the [SOURCE] button to change the operation mode.
2.Each time you press the [SOURCE] button, the operation mode changes in the following order:
Tuner (HD Radio) ➜ (SIRIUS Satellite radio) ➜ CD/MP3 ➜ USB/iPod ➜ BLUETOOTH ➜ AUX ➜ Tuner (HD Radio)...
∗iPod can connect to this unit via USB cable.
∗iPhone can also be connected to this system and “iPod” appearing in this manual should be referred to as “iPod/iPhone”.
Sound Adjustment
You can adjust a sound effect or tone quality to your preference.
To change sound setting
1.Press the [SOUND] button to switch to the sound adjustment selection display.
∗The factory default sound setting is “BEAT EQ”.
2.Then press the [x] or [v] button to
select the sound adjustment mode. Each time you press the [x] or [v] button, the sound adjustment mode changes as following order:
“BEAT EQ” ↔
∗In the case of display blinking “ENT”, you can press the [ROTARY] knob to adjust the setting value.
3.Turn the [ROTARY] knob to adjust the selected sound mode.
4.After completing settings, press the
[SOUND] button to return to the previous mode.
Adjusting the volume
1.Turning the [ROTARY] knob clockwise increases the volume; turning it counterclockwise decreases the volume.
∗The volume level is from 0 (minimum) to 33 (maximum).
●Setting the BEAT EQ
This unit is provided with 4 types of sound tone effects stored in memory.
Select the one you prefer.
∗The factory default setting is “OFF”.
Switching the display
Press the [DISP] button to select the desired display.
CX5019