Operations Common to Each Mode
To change adjustment setting
1.Press and hold the [DISP] button (1 sec.) to switch to the adjustment selection display.
2.Press the [x] or [v] button to select the “item name”.
“CLOCK” ↔ “CONTRAST” ↔
“COLOR” ↔ “CODE” ↔ “SCRN SVR” ↔ “SCROLL” ↔ “DIMMER” ↔ “BLINKLED” ↔
3.Turn the [ROTARY] knob to select the “desired setting value”.
∗In the case of display blinking “ENT”, you can press the [ROTARY] knob to adjust the setting value.
∗After completing settings, press the [DISP] button to return to the previous mode.
•Setting COLOR SCAN mode
As selecting “COLOR SCAN”, the color automatically changes.
∗The factory default setting is “COLOR SCAN”.
∗After 3 seconds the color changes to the other.
• Setting USER mode
The factory default setting is “RED 8” (red), “GREEN 8” (green), “BLUE 8” (blue).
As selecting “USER COLOR 1, 2, 3”, press the [ROTARY] knob to enter the setting.
1.Press the [x] or [v] to select “RED”, “GREEN” or “BLUE”.
2.Turn the [ROTARY] knob to select from 0 to 8.
3.Press and hold the [ROTARY] knob for 2 seconds or longer to store the color in memory and cancel the setting mode.
English
●Setting the clock
∗The clock is displayed in
Note:
•You cannot set the clock when it is displayed with only the ignition on. If you drain or remove the car’s battery or take out this unit, the clock is reset. While setting the clock, if another button or operation is selected, the clock set mode is canceled.
●Setting the contrast
You can adjust the display contrast to match the angle of installation of the unit.
∗The factory default setting is “10”. (Adjustment level: 1 to 16)
●Setting the button illumination
●Setting the
(CATS)
“CATS” is the acronym of “Clarion
•Setting your Personal Code
The set personal code screen appears.
The entered Personal Code will be set, and it will return to the previous screen.
Note:
•Write down your Personal Code in case you forget it.
•Erasing the Personal Code
The ERASE PERSONAL CODE screen appears.
Entering a Personal Code mode is cancelled.
CX501 25