Basic Operations
English
10 CX609E
2-1. Select “S-W VOL”.
3-1. Press the [w] or [z] button to increases
or decreases the subwoofer volume.
∗The factory default setting is “0”.
(Adjustment range: +6 to –6)

●Adjusting the HPF

2-1. Select “HPF”.
3-1. Press the [w] or [z] button to select as
following order.
“THROUGH” ↔ “60” ↔ “90” ↔ “120”
∗The factory default setting is “THROUGH”.

●Setting the BBE MP (Sound

Enhancement and Restoration for

compressed audio files)

BBE MP (Minimized Polynomial Non-Linear
Saturation) Process improves digitally
compressed sound, such as MP3, by restoring
and enhancing the harmonics lost through
compression. BBE MP works by regenerating
harmonics from the source material, effectively
recovering warmth, detail and nuance.
∗This fuction is effective for the audio files in the
CD/MP3/WMA/AAC or USB/iPod mode, but it is
ineffective for the video in the USB/iPod mode.
1. Press the [ ] button to switch to the sound
adjustment selection display.
2. Press the [x] or [v] button to select
“BBE MP”.
3. Press the [w] or [z] button to select “ON”
or “OFF”.
∗The factory default setting is “OFF”.
4. When you select “ON”, press the [ ]
button, then press the [w] or [z] button to
select as following order.
LOW↔MID↔HIGH
Notes:
•M anufactured under license from BBE Sound,
Inc.
•Licensed by BBE Sound, Inc. under one or more
of the following US patents: 5510752, 5736897.
BBE and BBE symbol are registered trademarks
of BBE Sound, Inc.
•Dur ing SOUND adjustment mode, if no operation
is performed for more than 10 seconds, this
mode can be cancelled and return to previous
mode.
CT (Clock Time) function
The CT function receives CT data sent from an
“Radio Data System” station and displays the
time.
∗If a CT data is not being received, “CT– –:– –”
appears in the display.
Note:
•CT data is not transmitted in some countries and
by some broadcast stations. Also, in some areas,
the CT may not display accurately.
CX609E_EN.book Page 10 Monday, January 19, 2009 4:28 PM